---
title: "Dimensional Letters & Logos"
description: "Custom-cut dimensional letters in acrylic, brushed aluminum, brass, or stainless — flush or stand-off mounted for lobbies, reception walls, and donor walls. Fabricated and installed by CorPro Visual."
canonical: https://www.corprovisual.com/applications/dimensional-letters
last-updated: 2026-11-19
site: "CorPro Visual"
---

# Dimensional Letters & Logos

> Custom-cut dimensional letters in acrylic, brushed aluminum, brass, or stainless — flush or stand-off mounted for lobbies, reception walls, and donor walls. Fabricated and installed by CorPro Visual.

A dimensional logo behind the reception desk is the single most-photographed sign in your building. We cut it, finish it, and mount it like part of the architecture.

Dimensional lettering is the cornerstone of interior signage — it's what makes a lobby look intentional instead of leased. We CNC-cut, route, or flame-polish letters in acrylic, brushed aluminum, brass, or stainless steel, then finish them to match your brand color and mount them flush, stand-off, or on a backer panel depending on the space.

Most of our school, parks district, and corporate work starts with a dimensional logo or wordmark — Challand Middle's reception desk lettering, the Clarendon Hills Park District stairwell installation, the Comply365 conference room identity walls. Each one is built to the same standard: clean cuts, true color, and a mount that disappears when you walk past it.

## What we make

### Letter styles & sizes

- Standard depth (½", ¾", 1", 1.5", 2") for indoor scale
- Architectural depth (3"+) for atrium or multi-story walls
- Cast metal (bronze, brass, aluminum) for dedication-grade work
- Halo-lit (back-illuminated) dimensional letters
- Polished, brushed, painted, or anodized finishes

### Mounting options

- Stand-off pin mount (the architectural standard)
- Flush adhesive mount for glass or sealed substrates
- Backer-panel mount for impact-resistant or quick-replacement installs
- Concealed pattern templates for crisp alignment
- Removable mounting kits for leased or short-term spaces

## Materials

- Acrylic — painted, edge-lit, or solid color, ¼" to 1.5" thick
- Brushed and polished aluminum, .063" to .25" thick
- Brass and stainless steel (cast or fabricated)
- Painted MDO for budget-grade installs
- Foam and HDU for oversized architectural letters

## Process

1. **Site measurement & lighting check** — We measure the wall, photograph the lighting, and note any obstacles (outlets, art rails, HVAC). For halo-lit work we also assess wall reflectivity.
2. **Design & to-scale proof** — You see the letters laid out in context — scaled against the wall in the actual photo — before we cut anything.
3. **CNC cut & finish** — Letters are routed in-house, deburred, and finished. Painted letters go to our paint booth; brushed metal gets hand-finished to a consistent grain.
4. **Pattern install** — Our crew brings a laser-aligned mounting pattern, drills the wall to spec, and sets each letter individually. Most lobby installs finish in a half-day.
5. **Walkthrough** — We walk the space with you, level any letter that needs it, and leave you with care instructions and a touch-up pen if applicable.

## FAQ

### How big can dimensional letters get?

Single letters up to roughly 8 ft tall before structural backing becomes a factor. Most lobby installs land between 6" and 24" — that's the size range where dimensional letters read best at conversational distance.

### What's the lead time?

Standard dimensional sets — measure to install — runs 3–5 weeks. Custom cast metal or oversized architectural pieces run 6–10 weeks. Rush is possible on small acrylic sets in about 2 weeks.

### Will the mount damage the wall?

Stand-off mounting requires small pilot holes (about ⅛" each) that are easy to patch and paint when the sign comes down. Flush adhesive mounts are removable on glass and sealed metal.

### Can you match an existing brand color exactly?

Yes — send a Pantone, a paint chip, or a sample of the existing sign. We color-match in our paint booth and provide a small sample for approval before we cut the full set.

### How much do dimensional letters cost?

As a starting point, CorPro's estimator prices cut acrylic letters at about $60 each at 4 inches tall, $90 at 6 inches, $125 at 8 inches, $155 at 10 inches, and $190 at 12 inches. Metal letters run about twice the acrylic price. Installation is quoted separately based on height and wall type.

### What materials are dimensional letters made from?

The most common options are cut acrylic, PVC, and metal (aluminum, stainless, or brass finishes). Acrylic and PVC are cost-effective for interiors; metal is preferred for premium lobbies and exterior building identification.

### Do you install dimensional letters in Rockford?

CorPro Visual is based at 6419 Material Ave in Loves Park, IL and installs throughout Rockford, the Stateline, the Chicago suburbs, and Southern Wisconsin. Addresses within about 30 miles of the shop have no travel fee.


Dimensional letters are the most-installed piece we make. Send us a photo of the wall and a rough brand asset and we'll come back with a working estimate within a business day.

## Contact

- Phone: 815-633-1201
- Email: web@corprovisual.com
- Address: 6419 Material Ave, Loves Park, IL 61111
- Hours: Mon–Fri 8:00am–4:30pm CT
- Request a quote: https://www.corprovisual.com/quote
